Three ivory crochet ghosts wearing an orange pumpkin hat, a brown witch hat and a colorful leaf crown.

Fall Ghosts Crochet Pattern: Three Autumn Decorations

These three crochet fall ghosts combine ivory scalloped bodies with an orange pumpkin hat, a bent brown witch hat and a colorful leaf crown. Add a fringed olive scarf, a little pumpkin and tiny acorns for a coordinated autumn display. This is an original, image-inspired pattern draft that has not been physically tested. AI-generated illustrations show the proposed construction; they are not real process photographs or evidence of exact stitch counts.

The visible product suggests rounded bodies, white arms and sewn autumn decorations. The recessed bases, three sizes, DK yarn, embroidered eyes and simplified three-lobed leaves below are proposed construction choices, rather than a recovered version of the reference maker’s pattern.

Project at a Glance

Skill level: intermediate. The project uses continuous rounds, increases, invisible decreases, front-loop edging, small flat motifs and several sewn components.

GhostApproximate body widthApproximate finished height, including headwear
Small leaf-crown ghost7 cm / 2.8 in8–10 cm / 3.1–3.9 in
Medium pumpkin ghost9 cm / 3.5 in11–13 cm / 4.3–5.1 in
Large witch-hat ghost10.5 cm / 4.1 in18–20 cm / 7.1–7.9 in

Estimated time: 12–18 hours for the full set, depending on crochet speed and sewing experience. This is a planning estimate.

Construction: each body is a domed shell with a separate flat base sewn above a scalloped hem. Arms and rounded accessories use continuous rounds. The scarf uses turned rows; the leaves use short rows or stitches around a chain. The crown band uses one joined round.

Sizing assumption: approximately 22 sc and 26 rounds per 10 cm / 4 in in firm fabric, using DK cotton and a 3 mm hook. This is an assumed planning gauge, not a measured result. Check a swatch and dry-fit each hat before sewing. Yarn, tension and stuffing change the final size.

Materials

Use smooth DK/light-weight cotton, preferably the same yarn line for every color. The Craft Yarn Council places DK in category 3/light and treats its hook and gauge ranges as guidelines. The smaller hook proposed here is intended to produce dense decorative fabric. See the Craft Yarn Council yarn-weight system.

Approximate quantities for all three ghosts:

ColorEstimated quantityUsed for
Ivory or soft white100–125 gBodies, bases, arms and flower petals
Pumpkin orange25–35 gPumpkin hat, pumpkin and leaves
Warm brown30–40 gWitch hat and stems
Dark olive green20–25 gScarf, crown band, leaves, vine and hanging cord
Golden yellow5–10 gLeaves
Red5–10 gLeaves and berries
BeigeAbout 5 gTwo acorns
Dark brownAbout 3 gAcorn caps and flower center
Black and peach pinkAbout 2 g eachFace embroidery

These are untested allowances; keep some spare yarn for tension differences. Buy by the listed weights and your chosen yarn label. No universal weight-to-length conversion is assumed.

You will also need a 3 mm crochet hook, removable stitch marker, yarn needle, embroidery needle if using finer face yarn, scissors, pins, a ruler and approximately 25–40 g of polyester fiberfill. Use finer black and pink cotton or split matching yarn for neat embroidery. No wire, glue, safety eyes or rigid inserts are required by this proposed pattern.

Crochet Abbreviations and Working Notes

US terminology follows the Craft Yarn Council crochet abbreviations. The council references standard terms, not this original pattern’s construction.

AbbreviationMeaning in this pattern
chchain
scsingle crochet
hdchalf double crochet
dcdouble crochet
sl stslip stitch
st / stsstitch / stitches
inc2 sc in the same stitch
decinvisible single-crochet decrease over 2 stitches

For an invisible decrease, insert the hook under the front loop of each of the next 2 stitches, yarn over and draw through both front loops, then yarn over and draw through the 2 loops on the hook. It consumes 2 stitches and produces 1.

For a magic ring, form an adjustable yarn loop, work the stated stitches into it and pull the starting tail to close the center.

Unless stated otherwise, work through both loops in continuous rounds without turning or joining. Move the marker to the first stitch of every round. A finishing slip stitch is not included in the round’s stitch count.

In turned rows, ch 1 does not count as a stitch. Turn after each row when instructed. For a color change, complete the last yarn-over of the preceding stitch with the new color; tie and weave ends securely inside the component. In this pattern, most colors are used for separate pieces rather than mid-round changes.

Instructions such as “3 sc” mean 1 sc in each of the next 3 stitches. Parentheses followed by “x 6” mean work that sequence six times. An em dash in a size column means that piece has ended; it is not an extra round.

Step 1: Crochet the Bodies and Bases

Three ivory body shells

Make one small, one medium and one large body. Start each in ivory with a magic ring. Keep the round marker at the back when positioning the face later.

RoundSmall: leaf-crown ghostMedium: pumpkin ghostLarge: witch-hat ghost
16 sc in a magic ring. (6 sts)6 sc in a magic ring. (6 sts)6 sc in a magic ring. (6 sts)
2inc x 6. (12 sts)inc x 6. (12 sts)inc x 6. (12 sts)
3(1 sc, inc) x 6. (18 sts)(1 sc, inc) x 6. (18 sts)(1 sc, inc) x 6. (18 sts)
4(2 sc, inc) x 6. (24 sts)(2 sc, inc) x 6. (24 sts)(2 sc, inc) x 6. (24 sts)
5(3 sc, inc) x 6. (30 sts)(3 sc, inc) x 6. (30 sts)(3 sc, inc) x 6. (30 sts)
6(4 sc, inc) x 6. (36 sts)(4 sc, inc) x 6. (36 sts)(4 sc, inc) x 6. (36 sts)
7(5 sc, inc) x 6. (42 sts)(5 sc, inc) x 6. (42 sts)(5 sc, inc) x 6. (42 sts)
8(6 sc, inc) x 6. (48 sts)(6 sc, inc) x 6. (48 sts)(6 sc, inc) x 6. (48 sts)
9sc in every st. (48 sts)(7 sc, inc) x 6. (54 sts)(7 sc, inc) x 6. (54 sts)
10sc in every st. (48 sts)(8 sc, inc) x 6. (60 sts)(8 sc, inc) x 6. (60 sts)
11sc in every st. (48 sts)sc in every st. (60 sts)(9 sc, inc) x 6. (66 sts)
12sc in every st. (48 sts)sc in every st. (60 sts)(10 sc, inc) x 6. (72 sts)
13sc in every st. (48 sts)sc in every st. (60 sts)sc in every st. (72 sts)
14sc in every st. (48 sts)sc in every st. (60 sts)sc in every st. (72 sts)
15sc in every st. (48 sts)sc in every st. (60 sts)sc in every st. (72 sts)
16sc in every st. (48 sts)sc in every st. (60 sts)sc in every st. (72 sts)
17sc in every st. (48 sts)sc in every st. (60 sts)sc in every st. (72 sts)
18—sc in every st. (60 sts)sc in every st. (72 sts)
19—sc in every st. (60 sts)sc in every st. (72 sts)
20—sc in every st. (60 sts)sc in every st. (72 sts)
21—sc in every st. (60 sts)sc in every st. (72 sts)
22—sc in every st. (60 sts)sc in every st. (72 sts)
23——sc in every st. (72 sts)
24——sc in every st. (72 sts)
25——sc in every st. (72 sts)

After the final plain round—Round 17 for small, Round 22 for medium, or Round 25 for large—sl st in the next stitch. Do not turn. Keep the yarn attached for the hem. The shell should be a rounded dome over a straight lower wall, with its bottom still open.

Scalloped hem

Ch 1; it does not count. Work in the front loops only of the final body round, beginning in its first marked stitch. For each scallop:

  1. Sl st in the next stitch.
  2. Skip the next stitch.
  3. Work 5 dc in the next stitch.
  4. Skip the next stitch.
  5. Sl st in the next stitch.
  6. Sc in the next stitch.

This consumes 6 body stitches and produces 8 worked stitches, including the two slip stitches. Work the scallop 8 times for small, 10 times for medium, or 12 times for large. The respective edging counts are 64, 80 and 96 stitches. Join to the first hem slip stitch, fasten off and weave in the tail. The join and ch 1 are not counted.

Leave the unused back loops of the final plain round accessible inside the hem; the base will be sewn to these loops.

Three flat ivory bases

Make one base per body. Start each in ivory with a magic ring. Work these continuous rounds explicitly, stopping at its final size row.

RoundSmall baseMedium baseLarge base
16 sc in a magic ring. (6 sts)6 sc in a magic ring. (6 sts)6 sc in a magic ring. (6 sts)
2inc x 6. (12 sts)inc x 6. (12 sts)inc x 6. (12 sts)
3(1 sc, inc) x 6. (18 sts)(1 sc, inc) x 6. (18 sts)(1 sc, inc) x 6. (18 sts)
4(2 sc, inc) x 6. (24 sts)(2 sc, inc) x 6. (24 sts)(2 sc, inc) x 6. (24 sts)
5(3 sc, inc) x 6. (30 sts)(3 sc, inc) x 6. (30 sts)(3 sc, inc) x 6. (30 sts)
6(4 sc, inc) x 6. (36 sts)(4 sc, inc) x 6. (36 sts)(4 sc, inc) x 6. (36 sts)
7(5 sc, inc) x 6. (42 sts)(5 sc, inc) x 6. (42 sts)(5 sc, inc) x 6. (42 sts)
8(6 sc, inc) x 6. (48 sts)(6 sc, inc) x 6. (48 sts)(6 sc, inc) x 6. (48 sts)
9—(7 sc, inc) x 6. (54 sts)(7 sc, inc) x 6. (54 sts)
10—(8 sc, inc) x 6. (60 sts)(8 sc, inc) x 6. (60 sts)
11——(9 sc, inc) x 6. (66 sts)
12——(10 sc, inc) x 6. (72 sts)

Slip stitch to finish and leave a 50 cm / 20 in sewing tail on each base. Lay the bases flat without stretching. Each perimeter must have exactly as many stitches as its corresponding body’s final plain round: 48, 60 or 72.

Checkpoint: do not sew the bases yet. Dry-fit a base inside its shell; its perimeter should match the unused back loops above the scallops, without forcing or gathering.

Ivory crocheted ghost shells with scalloped openings and three separate round bases on a wooden table.

Unadorned body shells and separate flat bases

Step 2: Add Faces, Arms and Stuffing

Embroider the faces

Place the marker at the back and locate the front halfway around the body. Pin the features before stitching.

SizeEye levelSpace between eye centersArm attachment area
SmallBetween Rounds 10 and 116 stitchesRounds 12–14
MediumBetween Rounds 14 and 158 stitchesRounds 16–18
LargeBetween Rounds 16 and 1710 stitchesRounds 18–20

For the small and medium figures, build each round black eye with several short satin stitches over about 2 stitches of width and 2 rounds of height. Add one tiny ivory highlight. For the large figure, embroider two upward-curving closed-eye arcs over approximately 3 stitches each.

Center a black smile one round below the eye line, spanning approximately 3 stitches on small, 4 on medium and 5 on large. Add three short peach-pink stitches to each cheek, one round below and just outside the eyes. A tiny red stitch inside the small ghost’s smile can suggest a tongue. Secure all embroidery ends inside the open body.

Six ivory arms

Make 6 identical arms, two per ghost. Start in ivory with a magic ring; work continuous rounds.

RoundInstruction
16 sc in a magic ring. (6 sts)
2inc x 6. (12 sts)
3(1 sc, inc) x 6. (18 sts)
4sc in every st. (18 sts)
5sc in every st. (18 sts)
6(1 sc, dec) x 6. (12 sts)
7sc in every st. (12 sts)

Add a pinch of stuffing to the rounded end. Flatten the open top so 6 stitches lie on each side. Work 6 sc through both layers, consuming the 12 rim stitches in 6 pairs. Fasten off with a 30 cm / 12 in tail.

Pin each arm’s closed edge in the attachment area above, at the body’s side positions, approximately one quarter and three quarters around from the back marker. Angle the medium and large arms slightly toward the front to hold their accessories; let the small arms extend slightly outward. Sew along the 6-stitch closed edge, then add one small anchoring stitch to hold the angle.

Stuff and close the bodies

Fill each dome gradually with fiberfill. Keep the lower edge and scallops loose; avoid packing them into rounded feet.

Position the matching base inside the shell. Sew each base perimeter stitch to one unused back loop of the body’s final plain round: 48 pairings for small, 60 for medium, or 72 for large. Leave a small opening until you check the shape on a table, adjust the stuffing, then finish sewing. The base should sit just above the loose scalloped hem, keeping the underside relatively flat.

Three ivory crochet ghosts with dark stitched eyes, smiling mouths, pink cheeks and paired white arms.

Faces, paired arms and closed ivory bodies

Step 3: Make the Pumpkin Ghost Accessories

Orange pumpkin hat

Make one in orange. Start with a magic ring and work continuous rounds.

RoundOrange pumpkin hat
16 sc in a magic ring. (6 sts)
2inc x 6. (12 sts)
3(1 sc, inc) x 6. (18 sts)
4(2 sc, inc) x 6. (24 sts)
5(3 sc, inc) x 6. (30 sts)
6(4 sc, inc) x 6. (36 sts)
7(5 sc, inc) x 6. (42 sts)
8(6 sc, inc) x 6. (48 sts)
9(7 sc, inc) x 6. (54 sts)
10(8 sc, inc) x 6. (60 sts)
11sc in every st. (60 sts)
12sc in every st. (60 sts)
13sc in every st. (60 sts)
14sc in every st. (60 sts)
15Working in front loops only: (4 sc, inc) x 12. (72 sts)
16sc in every st, through both loops. (72 sts)

Slip stitch to finish and leave a 40 cm / 16 in sewing tail. Do not stuff the hat. Dry-fit its 60-stitch inner edge around the medium ghost near Rounds 11–12, keeping the brim above the eyes.

To suggest pumpkin ribs, use a separate orange strand to sew six surface lines, evenly spaced around the hat, from the crown to Round 14. Let the strand follow the fabric rather than pulling it tightly enough to shrink the opening. Secure inside.

Brown hat stem

Start in warm brown with a magic ring.

RoundInstruction
16 sc in a magic ring. (6 sts)
2sc in every st. (6 sts)
3sc in every st. (6 sts)
4sc in every st. (6 sts)

Do not stuff. Fasten off with a 20 cm / 8 in tail, leaving the lower rim open. Sew that rim around the hat’s crown center and curve the stem slightly. Add the hat’s two olive leaves and flower after Step 5 provides the leaf instructions.

Small pumpkin

Make one in orange using continuous rounds.

RoundInstruction
16 sc in a magic ring. (6 sts)
2inc x 6. (12 sts)
3(1 sc, inc) x 6. (18 sts)
4(2 sc, inc) x 6. (24 sts)
5(3 sc, inc) x 6. (30 sts)
6sc in every st. (30 sts)
7sc in every st. (30 sts)
8sc in every st. (30 sts)
9sc in every st. (30 sts)
10(3 sc, dec) x 6. (24 sts)
11(2 sc, dec) x 6. (18 sts)
12(1 sc, dec) x 6. (12 sts)
13dec x 6. (6 sts)

Stuff after Round 12, before working Round 13. Thread the tail through the remaining 6 front loops and close. Leave a separate 80 cm / 32 in orange strand for shaping.

Use the starting ring as the top and the final closure as the bottom. Pass the shaping strand through the center from bottom to top, bring it down outside the pumpkin, and repeat at six evenly spaced positions. Gently tighten each pass to form six lobes; secure underneath. Expected width is roughly 4–5 cm / 1.6–2 in, depending on stuffing.

For its stem, use warm brown: ch 4; sl st in the second chain from the hook and each of the next 2 chains. (3 sl sts) Fasten off with a 20 cm / 8 in tail and sew the stem to the top. Add one olive leaf from Step 5.

For the curling vine, use olive: ch 9; work 2 sc in each of the 8 chains, starting in the second chain from the hook. (16 sts) Fasten off with a 20 cm / 8 in tail. Twist gently into a curl and sew the starting end beside the pumpkin stem.

Olive fringed scarf

Use olive green. Ch 97 and work turned rows; ch 1 never counts.

RowInstruction
1sc in the second chain from the hook and each remaining chain. Ch 1, turn. (96 sts)
2sc in every st. Ch 1, turn. (96 sts)
3sc in every st. Ch 1, turn. (96 sts)
4sc in every st. Fasten off; do not turn. (96 sts)

Estimated scarf size is 44 x 1.5 cm / 17.3 x 0.6 in at the planning gauge. Weave in both ends. Cut 6 olive strands, each 12 cm / 4.7 in long. Fold each in half and attach three fringes across each short scarf end with a lark’s-head knot: pull the folded loop through the edge, pass both loose ends through the loop and tighten. Trim evenly.

Tiny ivory flower

Make one flower for the orange hat.

  • Center round, dark brown: 5 sc in a magic ring; join to the first sc with a sl st. (5 sts) Fasten off with a 15 cm / 6 in tail.
  • Petal round, ivory: attach ivory in a center stitch. In that same stitch work ch 2, 2 dc, ch 2, sl st. Work that complete petal in each of the remaining 4 center stitches. (5 petals; 15 stitches anchored in the center round, plus 20 chains.) Fasten off with a 20 cm / 8 in sewing tail.

Checkpoint: keep the scarf and hand-held pumpkin separate until final assembly. Decorate the orange hat after crocheting the leaves in Step 5.

Orange crocheted hat with brown stem and ivory flower beside a ribbed pumpkin and an olive fringed scarf.

Pumpkin hat, small pumpkin and fringed scarf

Step 4: Make the Witch Hat and Acorns

Brown witch hat

Use warm brown. Start at the tip with a magic ring and work continuous rounds. Leave the cone hollow.

RoundBrown witch hat
16 sc in a magic ring. (6 sts)
2sc in every st. (6 sts)
3(1 sc, inc) x 3. (9 sts)
4sc in every st. (9 sts)
5(2 sc, inc) x 3. (12 sts)
6sc in every st. (12 sts)
7(1 sc, inc) x 6. (18 sts)
8sc in every st. (18 sts)
9(2 sc, inc) x 6. (24 sts)
10sc in every st. (24 sts)
11(3 sc, inc) x 6. (30 sts)
12sc in every st. (30 sts)
13(4 sc, inc) x 6. (36 sts)
14sc in every st. (36 sts)
15(5 sc, inc) x 6. (42 sts)
16sc in every st. (42 sts)
17(6 sc, inc) x 6. (48 sts)
18sc in every st. (48 sts)
19(7 sc, inc) x 6. (54 sts)
20sc in every st. (54 sts)
21(8 sc, inc) x 6. (60 sts)
22sc in every st. (60 sts)
23(9 sc, inc) x 6. (66 sts)
24sc in every st. (66 sts)
25(10 sc, inc) x 6. (72 sts)
26sc in every st. (72 sts)
27Working in front loops only: (5 sc, inc) x 12. (84 sts)
28Through both loops: (6 sc, inc) x 12. (96 sts)
29sc in every st. (96 sts)

Slip stitch to finish; leave a 50 cm / 20 in tail. Round 27 turns outward at the base of the cone; the following rounds widen the brim. Do not add stuffing or wire.

Dry-fit the 72-stitch cone opening over the large ghost near Rounds 12–13. Bend the tip sideways at approximately Rounds 5–8 and hold that curve with two small brown stitches between the tip section and the neighboring cone fabric. Avoid stitching through to the ghost at this stage.

Two beige acorns

Make 2 acorn bodies, one for the witch hat and one for the leaf crown. Use beige and continuous rounds.

RoundInstruction
16 sc in a magic ring. (6 sts)
2inc x 6. (12 sts)
3sc in every st. (12 sts)
4sc in every st. (12 sts)
5sc in every st. (12 sts)
6dec x 6. (6 sts)

Add a very small pinch of stuffing after Round 5. After Round 6, fasten off and close the remaining 6 front loops. The magic-ring end will be under the cap; the final closure points downward.

Make 2 caps in dark brown.

RoundInstruction
16 sc in a magic ring. (6 sts)
2inc x 6. (12 sts)
3Working in back loops only, sc in every st. (12 sts)
4Through both loops, sc in every st. (12 sts)

Slip stitch to finish each cap, leaving a 25 cm / 10 in tail. Place a cap over each acorn’s magic-ring end, with the cap edge near the body’s Round 3. Sew its 12 rim stitches to the 12 body stitches of that round.

For the witch hat’s hanging cord, use olive: ch 12; sl st in the second chain from the hook and each remaining chain. (11 sl sts) Fasten off with a 20 cm / 8 in tail at each end. Sew one end securely to the acorn cap center and the other to the hat tip, keeping the acorn above the ghost’s face. The second acorn has no hanging cord.

Bent brown crochet witch hat with visible hollow underside beside a beige acorn and a separate olive cord.

Hollow brown witch hat, acorn and hanging cord

Step 5: Make the Leaves, Berries and Crown

Six olive oval leaves

Make 6: two for the pumpkin hat, one for the hand-held pumpkin, one for the witch hat and two for the crown.

Use olive and ch 7. Work around the foundation chain without turning:

  • First side: sc in the second chain from the hook, hdc in the next chain, dc in each of the next 2 chains, hdc in the next chain, and 3 sc in the final chain.
  • Second side: continue along the unused underside loops: hdc in the next chain, dc in each of the next 2 chains, hdc in the next chain, sc in the final chain. Join to the first sc. (13 sts: 8 on the first side and 5 on the second.)

Fasten off each with a 20 cm / 8 in tail. Do not stuff. The three stitches at one end round the tip; the starting end is used as the leaf base.

Eight small three-lobed leaves

Make 8: three orange, three golden yellow, one red and one olive.

The distribution is: orange and yellow on the witch hat; orange, yellow and red on the crown; orange, yellow and olive on the small ghost’s body.

Start each leaf in its chosen color with ch 4.

RowInstruction
1sc in the second chain from the hook and each of the next 2 chains. Ch 1, turn. (3 sts)
2inc, 1 sc, inc. Ch 1, turn. (5 sts)
3inc, 3 sc, inc. Ch 1, turn. (7 sts)
4sc in every st. Ch 1, turn. (7 sts)

For the final row, a pointed lobe means: in one base stitch work sl st, hdc, dc, ch 2, sl st in the second chain from the hook, dc, hdc, sl st. This places 6 stitches into one base stitch and adds one ch-2 picot; the picot’s slip stitch is not included in the base-row stitch count.

Row 5: pointed lobe in the first stitch; sl st in the next stitch; sc in the next stitch; pointed lobe in the next stitch; sc in the next stitch; sl st in the next stitch; pointed lobe in the last stitch. (22 stitches worked into the 7 base stitches, plus 3 picots.) Fasten off with a 25 cm / 10 in tail.

Use the tail to sew a short straight line down the leaf’s center if desired, then retain enough tail for attachment. These are simplified three-lobed autumn leaves; their outline is an intentional adaptation of the image reference.

One larger red leaf

Make one in red for the large ghost to hold. Ch 6.

RowInstruction
1sc in the second chain from the hook and each remaining chain. Ch 1, turn. (5 sts)
2inc, 3 sc, inc. Ch 1, turn. (7 sts)
3inc, 5 sc, inc. Ch 1, turn. (9 sts)
4sc in every st. Ch 1, turn. (9 sts)
5Pointed lobe in the first st; sl st in each of the next 2 sts; sc in the next st; pointed lobe in the next st; sc in the next st; sl st in each of the next 2 sts; pointed lobe in the last st. (24 sts worked into the 9 base stitches, plus 3 picots.)

Fasten off with a 30 cm / 12 in tail. With an orange embroidery strand, sew one central vein from the foundation edge toward the center lobe, then two short diagonal veins toward the outer lobes. Weave the orange ends into the back of the leaf. Keep the red tail for attaching it.

Six red berries

Make 6, three for the witch hat and three for the crown. Use red, with continuous rounds.

RoundInstruction
16 sc in a magic ring. (6 sts)
2sc in every st. (6 sts)
3dec x 3. (3 sts)

Do not stuff. Fasten off with a 20 cm / 8 in tail, thread through the 3 remaining front loops and close. Roll lightly between your fingers.

Olive crown band

Make one in olive. Ch 48 and join to the first chain with a sl st, taking care not to twist the chain.

Round 1: ch 1; sc in each of the 48 chains, including the chain at the join; join to the first sc with a sl st. (48 sts) Do not turn. The ch 1 and joins are not counted. Fasten off with a 30 cm / 12 in tail.

Position the band join at the small ghost’s back. The front center is halfway around, near stitch 25. Pin five leaves along the front arc, with their bases at roughly stitches 17, 21, 25, 29 and 33. In that order use olive oval, orange three-lobed, red three-lobed, yellow three-lobed and olive oval. Let the leaves point upward and fan slightly outward.

Remove the band from the ghost and sew each leaf base across 2–3 band stitches. Sew the three red berries together just below the center leaves. Attach the crown acorn near the outer leaf on the viewer’s right. Keep the rear half of the band plain.

Checkpoint: the crown should sit around the small dome near Rounds 8–9, above the eye line. If the chain band is tight at your gauge, remake it with enough extra chains to sit comfortably and move the five leaf positions proportionally; this fit adjustment does not alter the body counts.

Olive crochet crown with colorful leaves and an acorn, beside a red three-lobed leaf, smaller leaves and red berries.

Leaf crown, larger red leaf and loose autumn details

Step 6: Assemble the Three Ghosts

Pin every accessory first. Use the faces and back markers to keep each front centered. Attach headwear with small stitches through the inner hat edge or crown band, rather than through the outer brim tips.

Medium pumpkin ghost

  1. Sew two olive oval leaves to the orange hat around the brown stem, with one pointing to each side. Sew the ivory flower just beside the stem, overlapping the leaf bases.
  2. Set the hat’s inner edge near body Rounds 11–12; check that the front brim clears the eyes. Tack it at the back and both sides, then secure the front with two small stitches.
  3. Wrap the olive scarf once around the body near Rounds 16–17, below the mouth. Cross the ends toward the viewer’s left and secure the overlap with a few olive stitches. Keep both fringed ends visible.
  4. Sew the pumpkin’s olive leaf beside its brown stem and vine. Center the pumpkin over Rounds 18–20. Sew its back to the ghost with two small orange stitches, then tack one white arm to each side of the pumpkin.

Large witch-hat ghost

  1. Sew the three hat leaves—one orange three-lobed, one yellow three-lobed and one olive oval—to the front of the cone just above the brim, near Rounds 24–26. Place the three red berries in a small cluster over the leaf bases.
  2. Secure the acorn cord at the bent tip if not already attached. Let it hang to one side, clear of the face.
  3. Position the hat’s inner edge near body Rounds 12–13, above the eyes. Tack it securely at the back, both sides and front; keep the brim loose.
  4. Place the large red leaf centrally over Rounds 19–22, with its foundation edge downward and center point upward. Tack its back to the body, then sew an arm to each outer edge so the ghost appears to hold it.

Small leaf-crown ghost

  1. Set the decorated crown near body Rounds 8–9, with the join at the back and the acorn at the viewer’s right. Secure the plain rear band and both side points with small olive stitches.
  2. Pin the orange, olive and yellow small three-lobed leaves across the lower front over Rounds 13–16, below the face, in that left-to-right order.
  3. Sew each leaf through its center and lower edge, allowing its pointed tips to sit slightly above the body fabric. Keep the scalloped hem free.
Three finished ivory crochet ghosts with autumn hats, a pumpkin, leaf decorations and sewing yarn on the table.

The three assembled ghosts and finished autumn details

Finishing

Weave every remaining yarn end into its corresponding piece. Check the hat tacks, acorn caps, cord ends, berry clusters, pumpkin and leaf attachments with a gentle tug. Smooth the scallops outward by hand and stand each ghost on its recessed base. Reposition loose stuffing only if you have left a small base-seam opening; close that opening afterward.

If the flat leaves curl, lightly dampen them, pin the lobes into position on a towel and let them dry before the final sewing. Avoid saturating the stuffed bodies. Recheck that both embroidered eyes and the mouth remain visible beneath the hat or crown.

Tips and Fixes

  • The ghost tips over. A tightly packed lower dome or a puckered base can create a rounded underside. Before closing the base seam, redistribute the stuffing upward and check that the base’s 48, 60 or 72 stitches are paired evenly with the matching body loops.
  • The hat covers the eyes. The opening may sit too low or the brim may be pulled inward by the sewing. Lift the inner edge to its specified body rounds and redo only the attachment stitches, allowing the brim to remain loose.
  • The scalloped hem puckers. A skipped or reused base stitch changes the repeat spacing. Mark every sixth body stitch before edging and verify that each scallop consumes six stitches.
  • Leaf points lose their shape. Tight picots and crowded lobe stitches can twist the motif. Work the ch-2 picots gently, spread each lobe with your fingers and damp-block the flat leaf before attachment.
  • The face disappears behind accessories. Pin the scarf, pumpkin and large leaf before sewing. Keep the scarf below the mouth and the held accessories in the lower front placement zones.

Questions about a step?

If a stitch count or assembly detail is unclear, send us the post link and step number. For more practice with small projects, explore our beginner crochet accessories guide.

Scroll to Top